top of page

Group

Public·176 members
C ( C H A C W S K
CENTENNIA (formerly Centennia Historical Atlas) Crack With Serial Key

Cara Setting Manual Ht Weierwei Vev-3288s !!INSTALL!!


Cara Setting Manual Ht Weierwei Vev-3288s >>> https://urlin.us/2ttE6x





How to Set Up Your HT Weierwei Vev-3288s Manually


If you are looking for a way to set up your HT Weierwei Vev-3288s radio manually, you have come to the right place. In this article, we will show you how to adjust the frequency, tone, and channel of your radio easily and quickly. You will also learn some tips and tricks to make the most of your radio communication.


HT Weierwei Vev-3288s is a compact and affordable radio that can be used for various purposes. It has a simple design and a clear LCD display that shows the channel number, frequency, tone, and battery level. It also has a built-in flashlight, FM radio, and alarm function. It supports up to 128 channels and can store up to 50 CTCSS and 104 DCS codes.


However, if you want to use your radio effectively, you need to know how to set it up manually according to your needs. This will allow you to communicate with other radios on the same or different frequencies, as well as access repeaters or radio stations. Here are the steps to set up your HT Weierwei Vev-3288s manually.


Step 1: Turn Off Your Radio


The first step is to make sure that your radio is turned off. This will prevent any accidental changes or interference while you are setting it up. To turn off your radio, press and hold the power button on the top right corner of the radio until you hear a beep sound.


Step 2: Turn On Your Radio in Self Mode


The next step is to turn on your radio in self mode. This mode will allow you to access the menu settings and adjust the frequency, tone, and channel of your radio. To turn on your radio in self mode, press and hold the menu button on the left side of the radio while turning on the power button. You will see the word "self" on the LCD display.


Step 3: Select the Channel Number


The third step is to select the channel number that you want to set up. You can choose any channel from 001 to 128. To select the channel number, press the enter button on the right side of the radio. You will see "CH" followed by a three-digit number on the LCD display. You can use the up and down buttons on the left side of the radio to change the channel number. Press the enter button again to confirm your selection.


Step 4: Enter the Receive Frequency (RX)


The fourth step is to enter the receive frequency (RX) that you want to use for your channel. The receive frequency is the frequency that your radio will listen to when you are not transmitting. To enter the receive frequency, type in the six-digit number using the keypad on the front of the radio. For example, if you want to use 143.500 MHz as your receive frequency, type in 143500. Press the enter button again to confirm your input.


Step 5: Enter the Transmit Frequency (TX)


The fifth step is to enter the transmit frequency (TX) that you want to use for your channel. The transmit frequency is the frequency that your radio will use when you are transmitting. To enter the transmit frequency, type in another six-digit number using the keypad on 248dff8e21






About

Welcome to the group! You can connect with other members, ge...

Members

Group Page: Groups_SingleGroup
bottom of page